Free 30-minute Live Webinar. See how craft producers and new licensees set up an automated filling line in minutes, run it with one person, and profit in weeks.
Register and you are entered to win. One attendee takes home a RollCraft MRB, the exact $3,500 machine from this training, free.
Watch the RollCraft MRB fill and pack a full tray. On the training we run the complete line live, fill and close, start to finished pre-roll.
Register below to attend live & enter to win a RollCraft MRB ($3,500).
1 BILLION+ PRE-ROLLS PRODUCED ON STM TECHNOLOGY
50% of the top 20 U.S. pre-roll brands run on STM · Made in USA, Spokane WA
And neither one works for a craft producer or a new license.
One packer does 500 to 800 joints a day and costs you $28,800 to $40,000 a year. Output is slow, weights are inconsistent, and canoeing sends your brand back to the customer.
The all-in-one systems start north of $200,000. That is capital debt most craft producers and new licensees cannot and should not take on just to make pre-rolls.
On August 5 we will show you exactly how to Launch your own automated pre-roll line starting at $3,500, run it with one person, and pay it off in weeks.
Here is what you will walk away knowing.
Unbox it, plug it in at 110V or 220V, and run your first fill in minutes. No pre-weighing. No technician. No line install.
One operator fills and packs up to 10,000 pre-rolls a day with consistent weights and no canoeing. See it run live on the training.
Replace a full-time hand-packer with a $3,500 machine. Typical payback lands in 6 to 12 weeks. We will run the math on screen.
Throughput and ROI vary depending on material, cone size, staffing, and operating conditions.
We are giving away the exact machine this training is about, a $3,500 RollCraft MRB, to one attendee. Here is how to enter.
STEP 1
Register on this page. That enters you in the drawing.
STEP 2
Attend the live training on August 5. Attendance is required to win.
STEP 3
Stay to the end. We draw the winner live on-screen.
No purchase necessary. Void where prohibited. Open to eligible U.S. participants 21+. See Official Rules.
We will be straight with you on the training, because it matters.
The RollCraft MRB ($3,500) fills and packs your pre-rolls. That is the slow, labor-heavy part where your money bleeds today, and it is the part you automate on day one.
To finish each pre-roll, you close it. At low volume you can hand-twist or use a Dutch Crown tool, which costs very little. As you grow, you add the RollCraft ATC ($24,995), our automated Dutch Crown closer, when your volume justifies it.
Want the complete automated line? The MRB + ATC bundle is $29,995, still a fraction of a $200,000+ system. We will show you the full path on the webinar so you know exactly what to buy and when. Financing and payment options available.
This is not a slideshow. We run the full RollCraft bundle end to end. The MRB fills and packs, the ATC folds a clean Dutch Crown, 72 joints per cycle. One tray, start to finished pre-roll.
The RollCraft ATC folds an automated Dutch Crown, 72 joints per cycle.
$29,995
A complete fill-and-close line for a fraction of a $200,000+ all-in-one system.
Claim My Free SpotThroughput varies depending on material, cone size, staffing, and operating conditions. Financing and payment options available.
Hand-Packing
$28,800 to $40,000
per year, per packer, for 500 to 800 joints a day
RollCraft MRB
$3,500 once
up to 10,000 a day, one operator
Typical Payback
6 to 12 weeks
then the savings are yours
Figures are illustrative. Actual results vary depending on material, cone size, labor rates, staffing, and operating conditions.
Skip the wait and talk to a RollCraft specialist now. Book a free 15-minute call, no pressure, just a straight answer on the right setup for your volume.
Buy a RollCraft MRB + ATC bundle on the call and we will include a Mini Revolution Grinder, a $6,600 value, free.
Book a Free CallFree Mini Revolution Grinder with qualifying RollCraft MRB + ATC bundle purchase. While supplies last. Ask your specialist for details. Financing and payment options available.
The same engineering behind 1 billion+ pre-rolls and half of the top 20 U.S. pre-roll brands, re-built to be affordable for craft producers and new licensees. Designed and manufactured in Spokane, WA.
Start your own pre-roll line starting at $3,500. Register free and enter to win a RollCraft MRB.
Wednesday, August 5, 2026 · 10:00 AM PT · 30 minutes · Free
Free to attend. No spam. Must attend live to win. One entry and one prize per company. Open to U.S. residents 21 and over at a licensed or license-pending cannabis business. No purchase necessary. Void where prohibited. Winner responsible for all applicable taxes. Employees of STM Canna and RollCraft and their immediate families are not eligible. See Official Rules for full eligibility and details. Throughput and ROI figures are illustrative and vary by material, equipment, and operating conditions.
© 2026 RollCraft. All Rights Reserved