🚀 Pre-Roll Filling Machine · Powered BY STM
The Pre-Roll Filling Machine Built for Growing Cannabis Brands
A durable, metal pre-roll filling machine that fills a tray in 60 seconds. No pre-weighing. No plastic parts to break.
Fill up to 10,000 pre-rolls/day. One operator. $3,500. Powered by STM Canna.
ROLLCRAFT MRB PRE-ROLL FILLING MACHINE
Quality Pre-Roll Output. Craft-Scale Price
Faster cycles, consistent fills, and built to last, at a craft-scale price.
Fills in <60 Seconds
Achieve up to 3× faster cycle times than a Knockbox, with Particle Lock Technology delivering consistent, repeatable fills every time.
No Pre-Weighing
The adjustable top tray meters every cone to the same weight and consistency. Reclaim the excess. No pre-weighing
Metal, Not Plastic
Aluminum and steel, STM-engineered for production. No plastic to crack and no hard-to-source parts like the Knockbox.
Cleans in Minutes
Replaceable liner bags. Reclaim or toss, wipe down with ISO, done. Faster to clean than a Knockbox or King Kone.
Your Current Pre-Roll Setup Is Costing You More Than You Think.
Pre-rolls are now the top-selling cannabis category, and demand keeps climbing. But whether you’re hand-packing or fighting a slow, plastic Knockbox, manual filling caps how much you can produce, and how much you can earn.
Pre-rolls are the fastest-growing cannabis category, with 63% year-over-year growth according to Headset.io.
High Labor costs Kill Margins
3-5 packers = $81,000-$200K/yr in wages. And they still can’t keep up.
Inconsistent Weight Variance = Brand Risk
Inconsistent fills fail compliance checks and cost you premium shelf placement.
All-In-One Systems Are Out of Reach
Hefestus and JuanaRoll start at $200K. Built for MSOs, not craft brands.
The Knockbox Has Hit Its Ceiling
100 cones/2.5-3 min. Manual. Plastic. Pre-weighing – it was never built to replace labor.
Head-to-Head
MRB vs Mini RocketBox vs Knockbox 100
Specs pulled from manufacturer pages. Objective comparison of the four most-searched pre-roll filling machines.
| Feature | ✦ RollCraft MRB | Mini RocketBox+ | Knockbox 100 |
|---|---|---|---|
| Price | $3,500 | $6,600 | $6,250 |
| Fill Speed / Cycle | ~60 sec per tray | 30-45 sec per tray | 2.5-3 min |
| Output / Day | Up to 10,000 | Up to 10,000 | 3,000-4,000 |
| Fill Method | Particle Lock Vibration | Particle Lock Vibration | Manual pull-slat, tamp |
| Pre-Weigh Material | Not required | Not required | Required |
| Operators | 1 | 1 | 1 (manual) |
| Construction | Aluminum + steel, rated components | Stainless steel, rated components | Plastic |
| Automated Closer Option | ✓ ATC Bundle | ✓ | Manual device |
| One-Tray Workflow | ✓ | ✓ | ✗ |
| Made in USA | ✓ | ✓ | ✗ |
| Brand Pedigree | STM Canna (10+ yrs) | STM Canna (10+ yrs) | Futurola |
* Competitor specs from manufacturer sites. Prices approximate. Results may vary.
What Craft Producers Are Saying
★★★★★
“We moved two hand-packers to packaging with the MRB on day one. Consistent fills, no pre-weighing like a Knockbox, and it paid for itself faster than we expected.”
— J. Marlow
Owner · VMP · RollCraft MRB
★★★★★
“Coming from a Knockbox, the difference is night and day. It is much faster, solid built and one operator runs the whole thing.”
— F. Johnson
Production Manager · Pure · RollCraft MRB
★★★★★
“For $3,500 I was a little skeptical. Built like a real machine, runs like one too. STM quality at a price that actually made sense for where we are.”
— A. Bowes
Owner / Operator · AFI · RollCraft MRB
Want to hear if the MRB fits your operation?
Talk to an Expert, FreeNo spam. No hard sell. Just a straight answer, usually within a few hours.
Brands Running RollCraft
Trusted by craft producers and established brands in 44 states.
Complete the Line
Fill + Close. Under $30K.
★ Best Value -MRB + ATC Bundle Automated Pre-roll Filling & Closing System
Pair the RollCraft MRB filler with the RollCraft ATC Dutch-crown closer. Full automated fill-and-close for 30–70% less than STM premium, 95% less than enterprise systems.
Scale & Grow
Fill + close up to 10,000/day with 1-2 operators.
Speed & Precision
72 joints filled and closed every 3 minutes.
Results that Matter
Clean Dutch crown every time which is ready for retail.
Labor Savings
1-2 operators run the full line instead of 5.
RollCraft Automation – $29,995
Average ROI: in just months through labor savings alone.
f.a.q.
RollCraft is a new line of pre-roll automation built specifically for craft cannabis producers. Scalable options have always been limited – until now. The RollCraft MRB fills up to 10,000 pre-rolls a day for $3,500. Add the ATC Dutch crown closer for a complete line under $30K
RollCraft is powered by STM Canna’s technology -1B+ pre-rolls filled, 50% of top 20 U.S. brands, 44 states, 14+ countries. Built in Spokane, WA.
RollCraft is a pre-roll automation brand built for craft cannabis producers and processors. Powered by STM Canna technology – the manufacturer behind 1B+ pre-rolls filled and 50% of the top 20 U.S. pre-roll brands. RollCraft bridges the gap between manual Knockbox-style equipment and enterprise systems costing $150K–$325K, offering professional fill-and-close automation starting at $3,500 – purpose-built for the fastest-growing category in U.S. cannabis.
A full-time hand-packer produces roughly 500–800 joints/day at $28,800-40,000/yr in labor. The MRB fills up to 10,000/day with one operator – paying for itself in weeks, not months.
The MRB uses pneumatic fluidization technology – a nitrogen-filled airbag leveling system that delivers consistent, precise fills that legacy tamping methods can’t match. Material funnels through a patented, adjustable top tray that regulates fill volume automatically. When the tray is full, all 72 cones are filled to the same precise volume – no manual pre-weighing, no overfilling, no underfilling. Repeatable every single run.
Unlike tamping or vibration-based systems such as the Knockbox 100 and King Kone, the MRB utilizes our patented Particle Lock Technology to achieve a superior pack.
As each pre-roll fills Particle Lock creates a controlled swirling vortex that allows material to naturally settle into place – like Tetris pieces finding their perfect fit. Every particle is guided into the optimal position, eliminating gaps, soft spots, and inconsistencies.
The result is a uniformly packed pre-roll with exceptional density, consistency, and draw performance – delivering a higher-quality product every time.
Knockbox
-Uses a manual pull-slat mechanism
-Constructed primarily from plastic
-Requires pre-weighing material before filling
-Produces approximately 5,000–6,000 pre-rolls per day
RollCraft MRB
-Uses PLT (Particle Lock Technology) to fill pre-rolls instead of tamping
-Built from durable aluminum and steel
-Requires no pre-weighing
-Produces up to 10,000 pre-rolls per day—nearly double the output of the -Knockbox
-MRB costs $3,500 vs $5,400 for the Knockbox 100
-Designed and manufactured in the USA by STM Canna
TA full-time hand-packer produces roughly 500-800 joints per day at $28,800-$40,000 per year in labor. The RollCraft MRB fills up to 10,000 per day with one operator at a machine cost of $3,500. At 5,000 pre-rolls per day, two hand-packers cost $57,600-$80,000 per year in labor. The RollCraft MRB replaces both, paying for itself in weeks through labor savings alone.
Both machines accomplish similar goals: pre-roll automation, labor savings, scalability and use similar proven STM patented technology. RollCraft is for smaller craft and emerging brands and STM is for higher volume pre-roll producers and output. The main differences: RollCraft MRB – low/high speed control vs variable 0-100, Mini-RocketBox motor is 2x more power and fills a tray in 30-45s vs 45-60s, warranty: 6 months vs 1-year for Mini-RocketBox.
The MRB is your Knockbox alternative. The Knockbox uses a manual pull-slat with plastic construction, not as precise, doesn’t have lift plate and adjustable top tray technology. The MRB is $3500 vs $5400. MRB is made from aluminum and steel. not plastic. MRB does not require any pre-weighing. The adjustable top tray regulates precision filling. Metal MRB vs Plastic Knockbox.
Modular beats the large complicated and expensive all-in-one machines like RollPros, Hefestus, Apehex, PreRollER every time. Not only is the ROI months instead of years, ease of use, cleaning and maintenance on the most basic level cannot compare. STM is a U.S. based manufacturer with U.S. support.
No. The MRB is the filler. Add the RollCraft ATC ($24,995) for a complete line. Bundle price: $29,995.
Yes, financing is available through various partners. Most operators hit ROI in 3–6 months through labor savings alone. We accept bank wires, credit cards and can also do layaway and other custom payment plans. Contact us for a custom breakdown.
RollCraft modular preroll machines work with most major brands in all the universal standard cone sizes: 70mm, 84mm, 98mm, and 109mm. Compatible with any standard pre-roll cone.
We sure do. Free virtual video training comes with each RollCraft machine. Our Client Services will schedule your training at the time convenient for you and your team. On-demand videos are also available 24/7 in our Learning Center which is included free to every RollCraft and STM customer. On-site training is available for a cost, inquire at support@stmcanna.com.
Client Services support is available M-F from 9am Eastern to 7:30pm. You can reach out to support@stmcanna.com or chat with us on our website. If after hours, leave a message and we will get back to you the next business day.
What 10,000 Pre-Rolls a Day Looks Like
Full specs on the MRB – STM-engineered, Made in USA, $3,500.
| Output | 10,000 pre-rolls/day |
| Fill System | Centrifugal particle lock |
| Power | 110V / 220V |
| Weight | 26 lbs (11.79 kg) |
| Build | Aluminum + steel |
| Cone Sizes | Universal standard |
| Tray Options | 72-joint · 143-joint |
| Warranty | 6 months |
| Origin | Made in USA · Spokane, WA |
| Price | $3,500 |
- Compact — fits tight production rooms
- No pre-weighing required
- Fast teardown between strains
- Separate control module
- One-Tray Workflow compatible
- STM-engineered — not a knockoff
Powered by the Technology behind
1 billion Pre-Rolls.
RollCraft is powered by STM Canna, the manufacturer behind 1B+ pre-rolls filled and 50% of the top 20 U.S. pre-roll brands.
Professional fill-and-close automation starting at $3,500, purpose-built for craft cannabis producers. Made in Spokane, WA.
Questions? Get a straight answer from a real person – usually within a few hours.
Short form. Fast response. No pressure.
write us or contact us on our social media